Wolfgeorge
- Dogi
- one shot one out !
- Messages : 2331
- Inscription : 16 juin 2008 18:03
- Localisation : Essonne/Normandie
Re: Wolfgeorge
No, the mechanics is the same on the DSR1 (and the same on the AW .338).
Thus the performances are identical. :|
Dogi
Thus the performances are identical. :|
Dogi
JG BAR10 - Trigger box PDI - Kit Cylindre Palsonite HD PDI - Inner Barrel 6,01mm PDI
Bloc Hop-up d'origine - Bucking Nineball
Bloc Hop-up d'origine - Bucking Nineball
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
How do you find your? I also have the Ares M200 and both are not that good!
Maybe if I convert them to HPA thing will be better but wouldn't like to carry a tank with me when I'm crawling on the bushes.
I have an HPA rig from the classics and it's pretty fuss to use it.
There's also this CO2 solution ... (not my rifle)



That's just fantastic but I don't like CO2 too much.
Wolf
Maybe if I convert them to HPA thing will be better but wouldn't like to carry a tank with me when I'm crawling on the bushes.
I have an HPA rig from the classics and it's pretty fuss to use it.
There's also this CO2 solution ... (not my rifle)



That's just fantastic but I don't like CO2 too much.
Wolf

Asahi WA2000 DX & Asahi M40 user
-
- one shot one out !
- Messages : 4287
- Inscription : 11 avr. 2004 21:15
- Localisation : Toulouse cong !
Re: Wolfgeorge
nice integration, I used a palmer regulator on my kj 10/22 but I was not really convinced I had 30 fps différence
powerp
et non, le groquik sauvage n'est pas un prédateur, sauf pour les lapins en chocolat
- Dogi
- one shot one out !
- Messages : 2331
- Inscription : 16 juin 2008 18:03
- Localisation : Essonne/Normandie
Re: Wolfgeorge
PGM 338 and DSR1 are improvable (originally, they are not well)Wolfgeorge a écrit :How do you find your? I also have the Ares M200 and both are not that good!
Maybe if I convert them to HPA thing will be better but wouldn't like to carry a tank with me when I'm crawling on the bushes.
I have an HPA rig from the classics and it's pretty fuss to use it.
It is necessary to replace the hop-up rubber, to put a good inner barrel, and if we can, to find CO2 mag.
I have a CO2 mag for PGM, the power are more constant.
After a well-kept dismantling and a degreasing/greasing, the rifle is good (but this rifle are to big for the low power French (< 2J)

Dogi
JG BAR10 - Trigger box PDI - Kit Cylindre Palsonite HD PDI - Inner Barrel 6,01mm PDI
Bloc Hop-up d'origine - Bucking Nineball
Bloc Hop-up d'origine - Bucking Nineball
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
My latest build... Infinity Tiki!
TM Hi Capa based.
It was a lot tougher than I originally thought, It need quite a few mods in order to fit and cycle properly... It's an Airsoft Surgeon kit, it's my first probably the last Airsoft Surgeon I'll ever buy, I expected more for $540 for just the kit, the color is too dull for my tastes and then I had fitting issues.
Maybe I'm too spoiled by Nova, Prime and ProG4 kits!!





Wolf
TM Hi Capa based.
It was a lot tougher than I originally thought, It need quite a few mods in order to fit and cycle properly... It's an Airsoft Surgeon kit, it's my first probably the last Airsoft Surgeon I'll ever buy, I expected more for $540 for just the kit, the color is too dull for my tastes and then I had fitting issues.
Maybe I'm too spoiled by Nova, Prime and ProG4 kits!!





Wolf

Asahi WA2000 DX & Asahi M40 user
- DieZeL
- one shot one out !
- Messages : 1438
- Inscription : 04 sept. 2012 21:42
- Localisation : Bex, Vaud, Suisse, au centre de l'Europe sans en faire partie, Planète Terre, Système solaire
Re: Wolfgeorge
Just amazing 

Les filles, c'est comme un engrenage... Une fois que tu as mis le doigt dedans...



- loky
- membre du bureau
- Messages : 2798
- Inscription : 03 juil. 2009 12:34
- Localisation : Annecy
Re: Wolfgeorge
+1 !DieZeL a écrit :Just amazing

- Mino
- membre du bureau
- Messages : 3702
- Inscription : 26 sept. 2008 15:26
- Localisation : Camps la source
-
- one shot one out !
- Messages : 4337
- Inscription : 01 juin 2012 17:28
- Localisation : Toulouse / Ariège
-
- one shot one out !
- Messages : 4287
- Inscription : 11 avr. 2004 21:15
- Localisation : Toulouse cong !
Re: Wolfgeorge
I have seen the grip before but too expensive - in the same mind the customslide G34 producted in few models by rwc was fine too


powerp
et non, le groquik sauvage n'est pas un prédateur, sauf pour les lapins en chocolat
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Thank you guys... it's very nice I must say but it required a lot more work in order to fit and function that I originally expected for such an expensive kit!
Wolf
Wolf

Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
-
- one shot one out !
- Messages : 436
- Inscription : 31 août 2010 13:10
Re: Wolfgeorge
An Escort, niceeeeeeeee !!!!!!
Old school style guy !!!!!!
This is a real airsoft.
Old school style guy !!!!!!
This is a real airsoft.
Lenteur egale precision, precision egale vitesse
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Thank you...
I've been looking for one of this for a couple years, it's the second I've seen.
I haven't shoot it yet but I don't expect to be better than the RS SVD of course. If it has the same range as a stock AEG I'd be happy.
It's really rare, Id don't know how many G&P SVD we converted to Escort but I know there are no more than a handful!
Wolf
I've been looking for one of this for a couple years, it's the second I've seen.
I haven't shoot it yet but I don't expect to be better than the RS SVD of course. If it has the same range as a stock AEG I'd be happy.
It's really rare, Id don't know how many G&P SVD we converted to Escort but I know there are no more than a handful!
Wolf

Asahi WA2000 DX & Asahi M40 user
Qui est en ligne ?
Utilisateurs parcourant ce forum : ClaudeBot[Bot] et 4 invités