L96 Tokyo Marui qui m'ennuie
Re: L96 Tokyo Marui qui m'ennuie
C'est des ressorts spécifiques AWS.
- Snaiperskaia
- sharpshooter
- Messages : 116
- Inscription : 19 févr. 2014 18:49
- Localisation : Senlis 60 / Maisons-Alfort 94
- Contact :
Re: L96 Tokyo Marui qui m'ennuie
J'ai acheté celui-là.
http://www.airsoft-entrepot.fr/pdi-ress ... -13mm.html
http://www.airsoft-entrepot.fr/pdi-ress ... -13mm.html
Facebook : https://www.facebook.com/nightlyairsoft
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html
-
- marksman
- Messages : 87
- Inscription : 28 août 2012 14:26
- Localisation : Brest
Re: L96 Tokyo Marui qui m'ennuie
moi j'avais pris ça...
445 fps +/-5 tout rond:
http://www.x-fire.org/etop/bolt_sp_thicker.html
avec spring guide 9mm
Tu n'aurais pas plutôt un gros problème d'étanchéité?
445 fps +/-5 tout rond:
http://www.x-fire.org/etop/bolt_sp_thicker.html
avec spring guide 9mm
Tu n'aurais pas plutôt un gros problème d'étanchéité?
Re: L96 Tokyo Marui qui m'ennuie
Tu as bien le bon ressort,le problème ne vient pas de la.
Difficile de diagnostiquer sans avoir la réplique sous les yeux !
Difficile de diagnostiquer sans avoir la réplique sous les yeux !
- Maverick59
- one shot one out !
- Messages : 998
- Inscription : 26 févr. 2013 18:34
- Localisation : Ronchin (59)
- Contact :
Re: L96 Tokyo Marui qui m'ennuie
ok donc si cest un pour aws le 130 est effectivement le bon. je pencherai pour un problème d'etancheité alors. Sinon par hasard, t'aurais pas le piston ou le cylindre qui bloque un peu? tu n'as pas du mal à réarmer?
- Snaiperskaia
- sharpshooter
- Messages : 116
- Inscription : 19 févr. 2014 18:49
- Localisation : Senlis 60 / Maisons-Alfort 94
- Contact :
Re: L96 Tokyo Marui qui m'ennuie
Aucun mal a réarmer. Je trouve ça même simple pour un 130...
Après jsuis tout nouveau dans le monde du bolt.
Ya peut être quelque chose que je pense bien faire qui en faite n'est pas bien faite du tout...
Après jsuis tout nouveau dans le monde du bolt.
Ya peut être quelque chose que je pense bien faire qui en faite n'est pas bien faite du tout...
Facebook : https://www.facebook.com/nightlyairsoft
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html
- Maverick59
- one shot one out !
- Messages : 998
- Inscription : 26 févr. 2013 18:34
- Localisation : Ronchin (59)
- Contact :
Re: L96 Tokyo Marui qui m'ennuie
si ça bloque pas, alors je vois rien d'autre qu'un problème d'étanchéité
- Snaiperskaia
- sharpshooter
- Messages : 116
- Inscription : 19 févr. 2014 18:49
- Localisation : Senlis 60 / Maisons-Alfort 94
- Contact :
Re: L96 Tokyo Marui qui m'ennuie
De retour après un long ptit moment sans nouvelles.
Le WE dernier après ma partie avec mon Bar-10 pour sa première partie. Je l'ai démonté, nettoyé, regraissé, bref une ptite inspection.
Jme suis dit si les joints des têtes de pistons entre le VSR et le L96 étaient compatibles (pastapé)
Alors j'ai démonté ce beau L96.
Pour au final m’apercevoir que non, c'est pas compatible (gros noob question snipe).
Enfin bref, un peu déçu je l'ai tout bien nettoyé, regraissé correctement (avec un tuto de ce forum)
pis j'ai armé et tiré pour voir que tout fonctionnais bien et là un bruit sourd et sortit, j'ai couru vers un paquet de 0.20g et mon chrony X3200
je tir, 395FPS, puis 400, puis 405, puis 402.
YEEEEEEEEEEEEEESSSSSSSS.
Je n'ai pas fait de tests de tir à l'occasion j'étais assez content d'avoir ce résultat après tant de mois sans rien de convaincant..
Ça m'a motivé de jouer au bolt avec tout ça xD Jvais laisser reposer mes AEG, je le sens.
Le WE dernier après ma partie avec mon Bar-10 pour sa première partie. Je l'ai démonté, nettoyé, regraissé, bref une ptite inspection.
Jme suis dit si les joints des têtes de pistons entre le VSR et le L96 étaient compatibles (pastapé)
Alors j'ai démonté ce beau L96.
Pour au final m’apercevoir que non, c'est pas compatible (gros noob question snipe).
Enfin bref, un peu déçu je l'ai tout bien nettoyé, regraissé correctement (avec un tuto de ce forum)
pis j'ai armé et tiré pour voir que tout fonctionnais bien et là un bruit sourd et sortit, j'ai couru vers un paquet de 0.20g et mon chrony X3200
je tir, 395FPS, puis 400, puis 405, puis 402.
YEEEEEEEEEEEEEESSSSSSSS.
Je n'ai pas fait de tests de tir à l'occasion j'étais assez content d'avoir ce résultat après tant de mois sans rien de convaincant..
Ça m'a motivé de jouer au bolt avec tout ça xD Jvais laisser reposer mes AEG, je le sens.
Facebook : https://www.facebook.com/nightlyairsoft
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html
Le blog : http://airsoftnightly.canalblog.com/
Silverback SRS Covert : http://airsoftnightly.canalblog.com/pag ... 14600.html
Cylcone : http://airsoftnightly.canalblog.com/pag ... 07933.html
ICS L86A2 LSW : http://airsoftnightly.canalblog.com/pag ... 76524.html