Wolfgeorge
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Finally one of my KC-02 is almost ready!
All steel internals, the only stock parts are the hop up housing, some screws and the actual receiver!!
The only think I might do is to polish the sides of the receiver as it's on the TK 10/22!
But I'll do that at much later time...!
The scope is too big... I've my 3-9x40 on a SR25 and it's at my home, I'll take some photo's again when I have more time.
The stock is a Magnum Research Barracuda and the barrel custom made carbon barrel by Woogie! Again thank you mate!!
Wolf
All steel internals, the only stock parts are the hop up housing, some screws and the actual receiver!!
The only think I might do is to polish the sides of the receiver as it's on the TK 10/22!
But I'll do that at much later time...!
The scope is too big... I've my 3-9x40 on a SR25 and it's at my home, I'll take some photo's again when I have more time.
The stock is a Magnum Research Barracuda and the barrel custom made carbon barrel by Woogie! Again thank you mate!!
Wolf
Asahi WA2000 DX & Asahi M40 user
Re: Wolfgeorge
Nice stock!
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Unfortunately no!
It's a Magnum Research barracuda stock!
I wish I could make something like this!
Wolf
It's a Magnum Research barracuda stock!
I wish I could make something like this!
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
After a long absence I'm back!
I'm almost done with the KC-02, all I'm waiting is a new steel piston.
I fount and installed a Tanio Koba 10/22 receiver!
It was a direct drop in fit.
Enjoy it
Wolf
I'm almost done with the KC-02, all I'm waiting is a new steel piston.
I fount and installed a Tanio Koba 10/22 receiver!
It was a direct drop in fit.
Enjoy it
Wolf
Asahi WA2000 DX & Asahi M40 user
- FamousCarpet
- one shot one out !
- Messages : 269
- Inscription : 25 mai 2014 18:28
- Localisation : La Tour-de-Peilz, Vaud, Suisse
- blackangel
- one shot one out !
- Messages : 1609
- Inscription : 14 avr. 2010 22:11
- Localisation : Lyon 8eme
- Contact :
Re: Wolfgeorge
your collection is horrible !!
i hate you !!!
When think you sell your WA-2000 GENETH ?
i hate you !!!
When think you sell your WA-2000 GENETH ?
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Thank you both for the kind words( I think )
@FamousCarpet it a bit lighter than the stock KC-02, almost everything has been replaced, I'm thinking to use a smaller rail.. I'll see how it will go.
@Blackangel.. The Geneth is on my future plans... It will be converted to HPA, semi automatic!!
Wolf
@FamousCarpet it a bit lighter than the stock KC-02, almost everything has been replaced, I'm thinking to use a smaller rail.. I'll see how it will go.
@Blackangel.. The Geneth is on my future plans... It will be converted to HPA, semi automatic!!
Wolf
Asahi WA2000 DX & Asahi M40 user
- FamousCarpet
- one shot one out !
- Messages : 269
- Inscription : 25 mai 2014 18:28
- Localisation : La Tour-de-Peilz, Vaud, Suisse
- blackangel
- one shot one out !
- Messages : 1609
- Inscription : 14 avr. 2010 22:11
- Localisation : Lyon 8eme
- Contact :
Re: Wolfgeorge
you think right
ican't wait to see that too
ican't wait to see that too
Re: Wolfgeorge
I don't like the basic plastic stock of the KC-02.
But this one is really nice, if I have to buy a KC-02, it will have a stock like this one
It must be expensive.
But this one is really nice, if I have to buy a KC-02, it will have a stock like this one
It must be expensive.
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
Initially Boyds released this stock for $140 and all the stock were gone very very fast.Art a écrit :I don't like the basic plastic stock of the KC-02.
But this one is really nice, if I have to buy a KC-02, it will have a stock like this one
It must be expensive.
Magnum research made some for $200, mine is Magnum research stock, it's getting harder and harder to find these.
They do pop up on eBay as used and the prices vary from $70-130.
It's a very very light stock the gun like this is lighter than a stock KC-02.
Personally I love it!
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
The latest addition to the collection.
A Star AW 338 gas Sniper Rifle.
I tried 3 times in the past to acquire this gun but now I found one here locally, its barely used but has some missing bits.
I have a feeling it shoots better than the DSR-1.. I will work on it the following days and see how it goes.
For now I have no plans to convert it to HPA but will see.
Now I will try to do a flat hop mod and replace the barrel.
This will be tested in the next game.
Wolf
A Star AW 338 gas Sniper Rifle.
I tried 3 times in the past to acquire this gun but now I found one here locally, its barely used but has some missing bits.
I have a feeling it shoots better than the DSR-1.. I will work on it the following days and see how it goes.
For now I have no plans to convert it to HPA but will see.
Now I will try to do a flat hop mod and replace the barrel.
This will be tested in the next game.
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge
KJW KC02 one of my favorite gun.
I love this thing, it's very light, semi only, 40 rnd mag, gbb..
What else to ask for.. sure it's not for woodland skirmishing since its too fancy and has so much bling on it but it works great in cqb's or urban environments.
The stock is from the RS Ruger 10/22
Receiver from the original Tanio Koba 10/22
Inner barrel RATECH 6.01
Outer barrel real carbon fiber made by Woogie Man and it's a full length barrel spacer .. The inner barrel is supported on the entire length of the barrel.
Mag catch RATECH
Full steel internals
I'm waiting for the Rogueworx aluminium bolt and it's done.
Wolf
I love this thing, it's very light, semi only, 40 rnd mag, gbb..
What else to ask for.. sure it's not for woodland skirmishing since its too fancy and has so much bling on it but it works great in cqb's or urban environments.
The stock is from the RS Ruger 10/22
Receiver from the original Tanio Koba 10/22
Inner barrel RATECH 6.01
Outer barrel real carbon fiber made by Woogie Man and it's a full length barrel spacer .. The inner barrel is supported on the entire length of the barrel.
Mag catch RATECH
Full steel internals
I'm waiting for the Rogueworx aluminium bolt and it's done.
Wolf
Asahi WA2000 DX & Asahi M40 user