trigger renforcée airsoftpro pour m24 SW et cyma

Toutes les répliques à mécanique APS : cylindre alésé à 20 mm,
APS2 / M24-CA / T96 / SR2 / MOD24 / etc... ainsi que les APS à cylindre gaz ou en configuration HPA.
Avatar de l’utilisateur
danga nsk
one shot one out !
Messages : 1259
Inscription : 23 mai 2010 13:41
Localisation : ile de la reunion

trigger renforcée airsoftpro pour m24 SW et cyma

Message par danga nsk » 21 sept. 2015 21:24

du nouveau pour les m24 snow wolf et aussi compatible CYMA 702, un bloc trigger renforcé airsoftpro^^ (a moins que cette infos ait plus sa place dans divers spring, a voir)

http://airsoftpro.cz/eshop/product_info ... ts_id=4073

Image

Body made by CNC machining from light, but durable aluminum alloy 6061-T6.
Aluminum parts with high quality anodized finish.
Piston catch, lever and the spring guide stopper are made of steel and hardened to HRC48-55.
The top of the trigger is equiped with ball bearing for the smoother trigger press.
Axis are made of stainless steel.
Two torsional springs safety returns catch to the original position.
Whole trigger is made of 20 parts.
Tested on springs up to M190.
All spare parts available.
Easy to install under two minutes.
Allow to use stock safety lever
Complete set is designed and manufactured in the Czech Republic. Partial technical solutions are protected by copyright!

This high quality trigger set fit in SW (Snow Wolf) M24, and also in CYMA M24 (CM.702) with the minor modification. You can use it for stock or any custom upgrade pistons and cylinders.
WORKING IS FOR PEOPLE WHO DON'T SURF. Image

david52
Messages : 8
Inscription : 20 nov. 2018 17:16

Re: trigger renforcée airsoftpro pour m24 SW et cyma

Message par david52 » 29 nov. 2018 17:43

salut :)

le spring guide stopper fournis avec est t-il compatible avec le spring guide d'originedu piston sur m24 sw ?
les deux ont l'air different.

si quelqun a la reponse :)
merci

Répondre