Jack sent in news about new company, called Airsoft Customs. I think that guys are Euro based, so - as we always say- this is good news for the airsoft on the old Continent. Details below:
Hi
I want to present new company and our new product. It's Walther 2000 replica it's spring powered and fully compatible with APS TYPE 96 replica. In stock our sniper rifle has 450fps. Its made with steel and wood parts. We want to make limited 20pcs series and then we will make another sniper rifle we are thinking abaut .50 cal rifles. Actualy we are preparing production line so first orders will be taken in second half of June. Price of our rifle is 530Eur its high becouse it's short run and it's custom made. Our site will be available soon I will sent news abaut it.
Regards
je connais un sbs qui va être content
source : airsoftnews
walter 2000
- groquik
- one shot one out !
- Messages : 4256
- Inscription : 11 avr. 2004 21:15
- Localisation : Toulouse cong !
walter 2000
powerp
et non, le groquik sauvage n'est pas un prédateur, sauf pour les lapins en chocolat
- groquik
- one shot one out !
- Messages : 4256
- Inscription : 11 avr. 2004 21:15
- Localisation : Toulouse cong !
Re: walter 2000
ack the Gunsmith: AC2000
Jack the Gunsmith sent in new update. They took over Airsoft Customs project. Also, worth of note: they decided to put Barret project on hold:
vu sur airsoft-news.eu des nouvelles du projet
We have full design of AC2000 Project since Airsoft Customs stop making airsoft guns. We decide to make the A/C2000 project
We have full external design but we modified internals.
Its spring powered but:
- We Are using modified GB v.3 Skeleton
- We are using standard AK steel hop-up chamber.
- We are using a 6,03 precission barrel
- 30 bb magazine.
To tune up You can use standard AEG parts.
The stock will have 380-400 Fps. External look is the same but we modified internals for easier tuning. We are taking only 10 orders
Regards
Jack
http://www.gunsmith.ovh.org
Jack the Gunsmith sent in new update. They took over Airsoft Customs project. Also, worth of note: they decided to put Barret project on hold:
vu sur airsoft-news.eu des nouvelles du projet
We have full design of AC2000 Project since Airsoft Customs stop making airsoft guns. We decide to make the A/C2000 project
We have full external design but we modified internals.
Its spring powered but:
- We Are using modified GB v.3 Skeleton
- We are using standard AK steel hop-up chamber.
- We are using a 6,03 precission barrel
- 30 bb magazine.
To tune up You can use standard AEG parts.
The stock will have 380-400 Fps. External look is the same but we modified internals for easier tuning. We are taking only 10 orders
Regards
Jack
http://www.gunsmith.ovh.org
powerp
et non, le groquik sauvage n'est pas un prédateur, sauf pour les lapins en chocolat